Orifice - Power Steering Pump
Case Study: Fulton Developed a stamped (complete) Orifice to replace a costly machined version and/or high temperature Phenolic version. There are several variations of hole sizes produced to cover a variety of pump designs and flow parameters.
Housing / Flange - ABS Sensor
Case Study: Fulton Developed many varieties of stamped (complete) Flanges to replace costly fine-blanked parts. The skirted designs were proven to be much stronger also.
Casing - Solenoid (ABS)
Case Study: Fulton developed a stamped (complete) Casing to replace a once stamped / machined part. This Casing features sidewalls 50% thinner than the bottom thickness and also features strict tolerances of +/-.002 [0.05mm] on wall thicknesses and the ID.
Casing - Solenoid (Steering)
Case Study: Fulton developed a stamped (complete) Casing w/ locating tabs. The tabs were once machined and/or trimmed in a secondary operation. The Casing features sidewalls 25% thinner than the bottom thickness and also features a shaved thru hole in the bottom of the part which is held to +/-.001" [0.025].